Akai MPC 2000XL Instrukcja Użytkownika Pobierz pdf (Strona 4)

Tools required: Philips screwdriver

Very important: Before starting,

unplug

power cord from MPC2000XL.

Find a blanket (folded), pillow, or cushion and place on table. Turn

MPC2000XL upside down and place on blanket to cushion the top of

the sampler where screen and jog wheel are located.

Step 1 – Open MPC2000XL

The bottom cover must be removed to access the inside of the sampler.

There are a number of screws located as shown below that must be

removed with a screwdriver. Remove all screws marked by red arrows

along the edges of the bottom cover. Keep all screws together. We like

to line up the screws in the order removed so that when we put the

screws back, each screw goes back in its original hole. Also, there are 2

screws (marked as A and B) that are holding the floppy drive or zip

drive in place. Remove the 2 screws and set aside.

1 2 3 4 5 6 7 8 9 ... 14 15

Brak uwag

Akai MPC 2000XL Instrukcja Użytkownika Strona 4